Glad I looked at the calculator. I noticed it got revised right after I posted my numbers. Therefore my
Volume in cubic inches X 0.017 = Exhaust Stack Volume in cubic inches, above the CC.... (ESV) 952.79
has changed to
Volume in cubic inches X 0.022 = Exhaust Stack Volume in cubic inches, above the CC.... (ESV) 1233.02
which means my stack that was
ESV in cubic inches_____________________________ ... = Stack Length in inches (36" +/-) 6"ID = 33.70
0.7854 X Stack Diameter X Stack Diameter
and has now changed to
ESV in cubic inches_____________________________ ... = Stack Length in inches (36" +/-) 6"ID = 43.61
0.7854 X Stack Diameter X Stack Diameter
almost 10" taller. I already have my 6" ID pipe so there's no turning back on the ID size. Luckily I had it cut at 48".
Now I'm wandering about the "Stack Length in inches (36" +/-)". I'm not gonna be close to 36". What do you guys think?
Dave, Is there a way, instead of just editing the thread in the future, that you can make a comment on the last page of the thread so it automatically goes to the top the list? I was not aware that the calculator had change until today's post by Brad.