New boy!!

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

bigjase33

Newbie
Original poster
Mar 28, 2014
6
10
Ireland
Hi everyone, I'm from Ireland, and new to smokin my own stuff. I have a tin dust bin that I have modified to use which actually is workin quite well. I attached a pic of it. I'm joining to hopefully get some tips from the seasoned pros on here on how to get the best results. Look forward to hearing from some of yas.

Jase

 
Glad to have you Jase,  Make sure that's not galvanized though !!!    Pretty ingenious I'll have to say

Gary S
 
I remembered to check with everythin but the bin itself but I've had a few things outta it so far and nothin wrong wit me haha. It works well and once I get the timings and stuff rite should be very gd for the summer comin in.
 
Hello Jase and Welcome to the forum. GREAT design!  My friend Gary S makes a good point.  I suspect that if it was galvanized, the galvanize on your dust bin was pretty thin and you "accidentally" burned it off bringing it up to temp.  You dodged a bullet!  Galvanize poisoning is a NASTY thing.  Now that you have found and joined us please feel free to ask any and all questions.  Safety brief over.  Many good folk here with a load of experience that they are more than willing to share.  If you have specific questions just start a thread and someone with experience will be along soon to offer advice.  All info you can provide us with such as smoker type, location and so on will help us answer any questions you may have.  Spend some time doing some research on the forums, tons of advice and recipes already available there.  We look forward to your contributions.  Have fun.  Good luck.  Keep Smokin!

Danny
 
Cheers for the help Danny. So should be gd to keep smokin then as the galvanised layer burns off?

That's gd news. Yea I'll be definitely havin an input and a look around the recipes and stuff.

Have a gd day
 
icon_lol.gif
  Hello Jase.  Can't say too much for you testing method, I haven't died yet so must be ok; but yes I would continue to use it.  Even mild galvanise poisoning feels like you have a hang over and you were in a fight with 3 BIG men; and you LOST!  You ache in places you didn't even know you had.  Good luck.  Keep Smokin!


Danny
 
Hey Jase

Welcome to the Smoking  forum.   You’ll find great , friendly people here, all more than willing to answer any question you may have.  Just ask and you’ll get about 10 different answers—all right.  LOL.   Don’t forget to post qviews.

Gary

[if gte vml 1]><v:shapetype id="_x0000_t75" coordsize="21600,21600" o:spt="75" o:preferrelative="t" path="m@4@5l@4@11@9@11@9@5xe" filled="f" stroked="f"> <v:stroke joinstyle="miter"/> <v:formulas> <v:f eqn="if lineDrawn pixelLineWidth 0"/> <v:f eqn="sum @0 1 0"/> <v:f eqn="sum 0 0 @1"/> <v:f eqn="prod @2 1 2"/> <v:f eqn="prod @3 21600 pixelWidth"/> <v:f eqn="prod @3 21600 pixelHeight"/> <v:f eqn="sum @0 0 1"/> <v:f eqn="prod @6 1 2"/> <v:f eqn="prod @7 21600 pixelWidth"/> <v:f eqn="sum @8 21600 0"/> <v:f eqn="prod @7 21600 pixelHeight"/> <v:f eqn="sum @10 21600 0"/> </v:formulas> <v:path o:extrusionok="f" gradientshapeok="t" o:connecttype="rect"/> <o:lock v:ext="edit" aspectratio="t"/></v:shapetype><v:shape id="Picture_x0020_9" o:spid="_x0000_i1025" type="#_x0000_t75" alt=":canada-flag-68:" style='width:30.75pt;height:20.25pt;visibility:visible; mso-wrap-style:square'> <v:imagedata src="file:///C:\Users\Owner\AppData\Local\Temp\msohtmlclip1\02\clip_image001.gif" o:title=""/></v:shape><![endif][if !vml]
clip_image001.gif
[endif]
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky