Well mine does.
I decided to re-purpose a old PC I had.
I will be using the AMNPS and this is for cold smoking only. Total cost of build $4.00 for the grates for the shelves, everything else I already had.
Step 1
I gutted the case (saving the fan).
Step 2
I lined the inside with Oak panels leaving room in the bottom left for air flow.
Step 3 I glued shelves in place
Step 4
Removed tape and made sure shelves were straight.
Step 5
Mounted fan (drilled many holes behind fan for air flow (cut DVD cover to fit spot to the right of the fan).
Step 6
Taped and Primed Case.
Step 7
Painted a nice hunter green (decals of Flames to come as soon as I print them)
Step 8
Cut some shelves from Grilling grates (extra support with wooded rods under grates).
Step 8
Trial run (barley see smoke coming out of fan)
Smoke also coming out the bottom as well.
I cannot wait to try it. Pics to follow when I do.
I decided to re-purpose a old PC I had.
I will be using the AMNPS and this is for cold smoking only. Total cost of build $4.00 for the grates for the shelves, everything else I already had.
Step 1
I gutted the case (saving the fan).
Step 2
I lined the inside with Oak panels leaving room in the bottom left for air flow.
Step 3 I glued shelves in place
Step 4
Removed tape and made sure shelves were straight.
Step 5
Mounted fan (drilled many holes behind fan for air flow (cut DVD cover to fit spot to the right of the fan).
Step 6
Taped and Primed Case.
Step 7
Painted a nice hunter green (decals of Flames to come as soon as I print them)
Step 8
Cut some shelves from Grilling grates (extra support with wooded rods under grates).
Step 8
Trial run (barley see smoke coming out of fan)
Smoke also coming out the bottom as well.
I cannot wait to try it. Pics to follow when I do.