[h2]VHT FLAMEPROOF[emoji]8482[/emoji] COATING[/h2]
VHT FlameProof[emoji]8482[/emoji] Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, silicone ceramic base widely used by the automotive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles and other high temperature applications. VHT FlameProof[emoji]8482[/emoji] Coating will withstand temperatures up to 2000°F (1093°C) and is ideal for use on headers, exhaust systems, or wherever an extreme temperature coating is needed.
Temperature: 1300°F-2000°F (704°C-1093°C)
Applications: Headers, Exhaust Manifolds, Piston Domes, Inside Heads
Finish: Flat
Dry Time: Curing time required and can be done on or off vehicle (see below)
[h3]Curing FlameProof[emoji]8482[/emoji][/h3]
VHT FlameProof[emoji]8482[/emoji] Coating only attains its unique properties after correct curing (refer to instructions on the can).
[h3]On the Vehicle[/h3]
- Paint must be completely dry before curing
- Run at idle for 10 minutes
- Cool for 20 minutes
- Run at idle for 20 minutes
- Cool for 20 minutes
- Run under normal operating conditions for 30 minutes
[h3]Off the Vehicle[/h3]
- Paint must be completely dry before curing
- Heat to 250°F (121°C) for 30 minutes
- Cool for 30 minutes
- Heat to 400°F (204°C) for 30 minutes
- Cool for 30 minutes
- Heat to 650°F (343°C ) for 30 minutes
Caution: Do not exceed the temperature of the least heat tolerant component or the base metal
[h3]Coating System[/h3]
VHT provides a multi-high performance coating system for the ultimate in protection and quality. The system includes surface preparation, primer, paint and clear coat.
Prep | SP445 | Prep Spray |
Prime | SP118 | FlameProof[emoji]8482[/emoji] Primer |
Coat | SPXXX | FlameProof[emoji]8482[/emoji] Color |
Finish | SP115 | FlameProof[emoji]8482[/emoji] Clear |
[h3]AVAILABLE IN THESE COLORS:[/h3]
- SP100 Flat Grey Primer
- MSDS
- SP101 Flat White
- MSDS
- SP102 Flat Black
- MSDS
- SP104 Flat Gray
- MSDS
- SP106 Flat Silver
- MSDS
- SP108 Flat Yellow
- MSDS
- SP109 Flat Red
- MSDS
- SP110 Flat Blue
- MSDS
- SP114 Flat Orange
- MSDS
- SP115 Satin Clear
- MSDS
- SP117 Flat Aluminum
- MSDS
- SP118 Flat White Primer
- MSDS
- SP998 Cast Iron
- MSDS
This is what I am considering in the RED or the BLACK, I know red shows more use and black don't but I can be a clean freak sometimes..