I'm ready to start assembly of my reverse flow smoker, but have a few questions before I start.
Cooker Info:
24.5" Diameter x 42" Long Cooking Chamber - 3/8" thick
Fire box Calculates at 21"x21"x21" 1/4" thick, giving a 140.4% size difference - Is this sufficient?
Chimney calculates at 6" Diameter x 17" long - Does the pipe need to extend inside the chamber? Is 17" correct?
Intake openings calculates at (3) 3.25" x 3.25" - Correct?
I have done my best to calculate half moon and came up with a 24.5" x 5.75" high - Is this close or need something different?
I plan on running a piece of angle iron down the center and using 2 pcs. of 1/4" plate for the damper - How high does the plate need to be from the half moon?
Sorry for all of the questions and thanks for helping a newbie out.
Wayne
Cooker Info:
24.5" Diameter x 42" Long Cooking Chamber - 3/8" thick
Fire box Calculates at 21"x21"x21" 1/4" thick, giving a 140.4% size difference - Is this sufficient?
Chimney calculates at 6" Diameter x 17" long - Does the pipe need to extend inside the chamber? Is 17" correct?
Intake openings calculates at (3) 3.25" x 3.25" - Correct?
I have done my best to calculate half moon and came up with a 24.5" x 5.75" high - Is this close or need something different?
I plan on running a piece of angle iron down the center and using 2 pcs. of 1/4" plate for the damper - How high does the plate need to be from the half moon?
Sorry for all of the questions and thanks for helping a newbie out.
Wayne