A little bit of Oak

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

flatbroke

Master of the Pit
Original poster
OTBS Member
★ Lifetime Premier ★
Sep 16, 2007
4,166
12,075
can’t run a stick burner without sticks. Went out today to get started on next years Wood pile got escorted by a bunch of turkeys
812C64AB-B236-44F1-9870-FBCB100A2D19.jpeg

The rounds I had eyeballed were about 24 inches in diameter so rather than end up with a 3rd nutt I took the tractor for the heavy work parked it right in the middle of a poison oak bed
3EAC8960-DCE6-42E8-A82C-8C307D59B0CB.jpeg

My pops hauled out the first load while by brother and I wrangled up another before he returned an hour and half later
1CE6E6D1-072E-4E1F-8F4A-404D13DA5B15.jpeg

Lucky for us there wasn’t much limb wood. 24 inch pieces sure fills up a 7x14 trailer in a hurry. I stacked the small ones op top. Only 25-30 more loads to go. Got to get busy splitting.
E18021A3-283F-4B69-B862-74B4CB46C82C.jpeg
 
no pain no gain. good start to the wood pile.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky