A little bit of Oak

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

flatbroke

Master of the Pit
Original poster
OTBS Member
★ Lifetime Premier ★
Sep 16, 2007
4,166
12,076
can’t run a stick burner without sticks. Went out today to get started on next years Wood pile got escorted by a bunch of turkeys
812C64AB-B236-44F1-9870-FBCB100A2D19.jpeg

The rounds I had eyeballed were about 24 inches in diameter so rather than end up with a 3rd nutt I took the tractor for the heavy work parked it right in the middle of a poison oak bed
3EAC8960-DCE6-42E8-A82C-8C307D59B0CB.jpeg

My pops hauled out the first load while by brother and I wrangled up another before he returned an hour and half later
1CE6E6D1-072E-4E1F-8F4A-404D13DA5B15.jpeg

Lucky for us there wasn’t much limb wood. 24 inch pieces sure fills up a 7x14 trailer in a hurry. I stacked the small ones op top. Only 25-30 more loads to go. Got to get busy splitting.
E18021A3-283F-4B69-B862-74B4CB46C82C.jpeg
 
no pain no gain. good start to the wood pile.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky