How I light my AMNPS w/ video link

Discussion in 'Slicers, Grinders, Tools, Equipment' started by scootermagoo, May 11, 2013.

  1. scootermagoo

    scootermagoo Smoking Fanatic

    I have a link to my youtube video of me lighting my AMNPS.



    Enjoy!
     
    Last edited: Jun 27, 2013
    supplysergeant and smokedcaveman like this.
  2. bearcarver

    bearcarver Smoking Guru OTBS Member

    Nice video, Scooter!!!

    Awesome way of lighting it fast !!!

    I accomplish the same thing, but it takes me a lot longer.

    I light it with my torch, and then blow on it every few minutes, in the direction of the bottom of the unburned pellets, until I get a real deep, good sized cigar-like cherry going. This could take up to 20 minutes, but that occurs while I am also doing other things too..

    Then & only then is it ready to put in the smoker.

    The way you light yours, and the way I light mine, makes it stay lit until we either put it out, or it runs out of fuel. I am always telling people how to light it, because most people don't get it lit properly before they put it in the smoker, and then it goes out on them.

    I could never emphasize enough getting it lit properly in the first place, if people want it to keep smoking.

    Thanks,

    Bear
     
  3. Great video.

    The only difference for me is that I use a blow torch for 15 seconds. That seems to do the job. 
     
    Last edited: May 18, 2013
  4. seenred

    seenred Smoking Guru Group Lead OTBS Member

    Great video, Scott!

    I don't have one of those cool heat guns (Tool Envy!), so like Bear,  after I get it going nicely with a torch, I just blow on mine until I have that nice hot cherry.  Then, just for good measure, I'll hit it with the torch again to ensure it's really, Really red-hot.  Always takes me at least 10 minutes before I'm convinced its ready to go in the smoker.

    Red
     
    Last edited: May 18, 2013
  5. njfoses

    njfoses Meat Mopper

    Ever have issues with the adjacent row catching fire while lighting?
     
  6. bearcarver

    bearcarver Smoking Guru OTBS Member

    No, but if you let your torch stray to the next row, it could.

    Bear
     
  7. scootermagoo

    scootermagoo Smoking Fanatic

    Nope, there is enough separation in the tray that it's not a problem.

    EDIT:  I did have it jump rows from an overenthusiastic lighting recently.  The cure: fill the starter row, then light.  Once it's started, fill up the remaining rows.
     
    Last edited: Aug 29, 2013
  8. njfoses

    njfoses Meat Mopper

    After seeing your video i bought a cheap wagner heat gun today.  Had an issue at first with the second row of pellets starting to ignite which im sure was due to me having to much fun with the heat gun.  Worked really well to get the amnps lit quickly and reliably!
     
  9. oldschoolbbq

    oldschoolbbq Smoking Guru OTBS Member

    As I say.....
     
  10. jrod62

    jrod62 Smoking Guru Group Lead OTBS Member

    nice video,

    I lit mine with the weber lighter cubes,
     
  11. mneeley490

    mneeley490 Master of the Pit OTBS Member

    Nice idea. I'm going to have to get me one of those heat guns. The propane torch alone doesn't always do it.
     
  12. pgsmoker64

    pgsmoker64 Master of the Pit Group Lead OTBS Member

    Love it Scott!  Great job on the video.  I especially enjoyed the popups commenting on the narrative, etc.  Nicely done.

    Additionally, I really like the name of your smoker although I'm sure it has some folks flashing back or going into anti-drug mode but I take it for what it is...a great play on words (a pun for you English majors)

    Super!

    Bill
     
  13. 173rdherd

    173rdherd Fire Starter

    finally going to use my amnps in my mes30 Saturday to smoke a turkey and am using your video for my first lightoff. I hope to be posting the most awesome review ever on  Sunday for Todd's product........Any videos on converting an MES40(new) to permanent pellet use?
     
  14. mneeley490

    mneeley490 Master of the Pit OTBS Member

    Type "mailbox+mod" in the search field, and you will find many threads on the subject.

    I will be modifying mine this weekend. [​IMG]
     
  15. Hey Scooter, thanks for posting this video on starting the fire... :)
     
  16. themole

    themole Fire Starter

    Seen, just use the wifes hair dryer. Does the same thing, just not as much heat. The pellets are already burning, the fast air across them is what gets the cherry glowing.
     
     
  17. meatpacker

    meatpacker Fire Starter

    Seems I saw a guy use a NEW soldering iron to light his
     
  18. mneeley490

    mneeley490 Master of the Pit OTBS Member

    That seems kinda slow. Might as well use a magnifying glass...
     
  19. I have been using this method now myself. Works a treat but I was having trouble with the second row lighting without me knowing about it.

    Just like Scooter stated above. Light one row, get it glowing hot then fill the rest. Never a problem since.

    Heat guns are always on dirt cheap somewhere. Maybe Todd should package as a unit purchase along with the mini torch...lol
     
  20. I have a MES 30 and follow the guide lines from Tod and have never had a problem lighting my AMPS but stopping it is another matter. I just use the Propane torch that came with it light the open end for about 1 min and then let it burn. When it has a good cherry ember  I blow out the flame and place it on the left of the chip tray holder. I have had the second row light but figure I over filled the tray.  I open the chip tray loader 1.5 inches for the draft and let it go. Good luck I don't think you really need the heat gun. If you need the heat gun you need more draft I always keep my vent open and have no problems.  Jim
     
    Last edited: Nov 4, 2013

Share This Page