Flame boss on WSM

Discussion in 'Meat Thermometers' started by daznz, Jul 11, 2016.

  1. I'm fitting a flame boss 100 to my wsm do I need block all bottom vents with heat tape as my vents don't seal so well. I certainly will be sealing the door up.. do you run the top vent fully open or just open?
    Cheers Daza.
  2. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    I have all the vents taped on my WSM/Guru setup.

    Yes keep the top vent fully open.

  3. lemans

    lemans Master of the Pit OTBS Member SMF Premier Member

    I'm running a pitmaster IQ120 on my WSM , bottom vents taped top vent wide open.. Didn't seal the door..
    Sits at 240 unless I have the top off too long . ( wont do that again)
  4. Thanks for you help guys, My WSM is a old model I've had it for about 16 years the door is very loose so I will silicone a oven seal to it.

Share This Page