Cajun Injector O-ring

Discussion in 'Slicers, Grinders, Tools, Equipment' started by pit 4 brains, Aug 14, 2016.

  1. pit 4 brains

    pit 4 brains Master of the Pit Group Lead OTBS Member SMF Premier Member

    Anyone know where to get a replacement o-ring for a Cajon Injector? Mine gave up the ghost. I looked at the website but didn't see anything for replacement parts.
     
  2. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    Take the O-ring and plunger to an automotive parts house...  or maybe your local Ace Hardware store... they have boxes of O-rings where you can find a replacement....   probably for about $1.......  If you have a dial gauge,micrometer,  where you can measure the diameter of the ring material that would be a big help...   I'm sure they use a standard O-ring to save cost...  

    Or McMaster-Carr has a wide selection....

     http://www.mcmaster.com/#o-rings/=13qjm09

     
    Last edited: Aug 15, 2016
  3. pit 4 brains

    pit 4 brains Master of the Pit Group Lead OTBS Member SMF Premier Member

    Thanks for the info. I was looking at the McMaster food service O-rings but I really didn't want to pay for 25 of them.

    I found a new one on Amazon for $14.00

     !!

    It will arrive at my door tomorrow.. Done deal. Thanks again Dave..
     
  4. pit 4 brains

    pit 4 brains Master of the Pit Group Lead OTBS Member SMF Premier Member

    WooHoo it's here!!

    What a nice little injector this is. The needles, tube and plunger are all 304 stainless steel.

    It came with three needles and extra Teflon O-rings.

    I got this on a lightning sale on Amazon for 14.99 ![​IMG]



     
  5. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    That is a really sweet deal....  If I didn't have 4 injectors, I'd order one.....
     
  6. hoity toit

    hoity toit Master of the Pit SMF Premier Member

    tractor supply has o rings
     
  7. pit 4 brains

    pit 4 brains Master of the Pit Group Lead OTBS Member SMF Premier Member

    Really good quality ( coming from an aircraft mechanic) fit form and function. Way better than the leaky Cabela's Cajun Injector I've been using all this time..
    Love TS! Got my GOSM there in Wichita Falls.. 

    I really wanted some food grade stuff. We had a few o-rings at work that may have work but they are designed to seal off  hydraulic fluid, not brine...

    I couldn't pass up this deal for a pack of free o-rings..
     

Share This Page