Building a vertical cabinet smoker (a mix of backwoods,spicewine, my design, and some info from BBQ Engineer )
All we got done today was cutting all the length of 1.5 inch square tube steel.
And put together a smoker for the Father in law
welding begins next weekend!
---UPDATE---
I had a few design flaws, didnt take into account the width of the tubes so i had to trim off 1.5" off to make things work. Soooo on to the pics
The tops and bottoms of the smokers
Welding the uprights
Almost there
Welding the firebox area
Cool picture of the day
Top side checking for fitting
Me tacking the top in place
The two frames completed
Tomorrow, we are going to lay the beads down and start cutting the interior.
All we got done today was cutting all the length of 1.5 inch square tube steel.
And put together a smoker for the Father in law
welding begins next weekend!
---UPDATE---
I had a few design flaws, didnt take into account the width of the tubes so i had to trim off 1.5" off to make things work. Soooo on to the pics
The tops and bottoms of the smokers
Welding the uprights
Almost there
Welding the firebox area
Cool picture of the day
Top side checking for fitting
Me tacking the top in place
The two frames completed
Tomorrow, we are going to lay the beads down and start cutting the interior.