Need ideas and help

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

fmfa0801

Smoke Blower
Original poster
May 8, 2011
87
10
I am looking at doing a electric fridge smoker build. I have a few questions.

1. Will any fridge/freezer work?

2. Besides removing the plastic insides, do I need to do anything else to the fridge/freezer?

3. What size vent on top and what to use?

4. where to get metal racks and how to mount.

5. Right now I have a digital masterbuilt 30 electric smoker. Could I swap the control panel and heating element over to the fridge smoker? 

6. If I need to buy a bigger heating element, where can I buy the heating element and controller and what size? 
 
I would highly suggest finding a fridge/freezer that is old enough to have metal insides otherwise you'll end up replacing the entire inside and unless you're really good with sheet metal this could be a real bear!

For my vent I just used a piece of 4" aluminum vent pipe. Seems like it works well, although I haven't smoked anything in mine yet. Still seasoning it!

You could certainly swap the controls off you MES but why would you? I used an old oven control board but a lot of the guys build PID controllers which I would certainly use if I hadn't found the oven controller. I would say the element from the MES wouldn't be big enough and I doubt the controller from the MES can handle a much larger element. So I guess what I'm saying is no the MES isn't a good idea, not to mention why would you want to ruin your MES?

There are tons and tons of options for elements. Mine is the broiler element from the same oven I stole the controls from and you can buy broiler elements from all kinds of places online. I know BassPro Shop sells replacement element for the ECBs for $30. I've read of guys using finned strip heaters and again there's all kinds of places you can get them online just Google them, I know Grainger is one source.

You can check out some of the pics on my post for ideas on the vent pipe, element, and controller.

Enjoy and good luck!
 
Welcome..

This site has tons of info.

I would suggest you spend some time reading all the different forums and the WIKIs.

Then use the handy dandy search tool for specific interests!!

Have a great day!!!

Craig
 
Any ideas on where to find a old metal fridge or freezer? I called a few stores and junkyards but nothing. I even put a ad in craigslist.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky