Got the mods completed...
Replaced OEM thermometer with two that can be calibrated. Removed and plugged old thermometer hole.
New wheels all the way around. 10" air filled...
New hook hangers and added a grommet for temp probe.
Gaskets on the sides. Made my own "Z" channel.
Gasket on front and added exhaust vent.
Gasket on back of hood.
Added basket to SFB.
Tuning plates and damper.
Used high temp RTV on all seams and shimmed the hood hinges with extra washers to take out the slop. She is ready to season.
Any tips on seasoning? I'm going to use bacon grease. The instructions I have is below. Should I heat before coating with oil or oil before heating grates the first time?
Thanks!!
Cure GRILL prior to your initial use to protect the exterior finish and to prevent unnatural flavors to your first meals. Heat
grates to 300* for 30 minutes.
(A) Lightly coat ALL INTERIOR SURFACES (including GRILLS, GRATES, and INSIDE of
BARREL) with vegetable oil.(spray veg. oil works best but do not use near hot coals or fire).
(B) Build a medium size fire on
the FIRE GRATE.
(C) After coals ash over, spread out coals, replace COOKING GRATE, close LID and burn at 250* for two hours. Re-coat GRATES and return to grill at 200* for 2 hours. Your GRILL will then be ready for use.
Replaced OEM thermometer with two that can be calibrated. Removed and plugged old thermometer hole.
New wheels all the way around. 10" air filled...
New hook hangers and added a grommet for temp probe.
Gaskets on the sides. Made my own "Z" channel.
Gasket on front and added exhaust vent.
Gasket on back of hood.
Added basket to SFB.
Tuning plates and damper.
Used high temp RTV on all seams and shimmed the hood hinges with extra washers to take out the slop. She is ready to season.
Any tips on seasoning? I'm going to use bacon grease. The instructions I have is below. Should I heat before coating with oil or oil before heating grates the first time?
Thanks!!
Cure GRILL prior to your initial use to protect the exterior finish and to prevent unnatural flavors to your first meals. Heat
grates to 300* for 30 minutes.
(A) Lightly coat ALL INTERIOR SURFACES (including GRILLS, GRATES, and INSIDE of
BARREL) with vegetable oil.(spray veg. oil works best but do not use near hot coals or fire).
(B) Build a medium size fire on
the FIRE GRATE.
(C) After coals ash over, spread out coals, replace COOKING GRATE, close LID and burn at 250* for two hours. Re-coat GRATES and return to grill at 200* for 2 hours. Your GRILL will then be ready for use.