11lb point

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

smoking canada up

Fire Starter
Original poster
Jun 14, 2007
46
10
elmira ont canada
What do i do with this over 2ft long point. It goes from 5 inches to 1/2 inch end to end. The bone has been removed and most or all of the flat has been removed, do i just stick a thermometer in the thick end and just pull that end that is done out and then cut the rest into burnt ends. Or do i stick all 5 thermometers in it and cut the parts off that are done as they become done. please help!!!!
 
ok the first pic shows it better. id still put some goodies in the thin end & fold it over & pin it back to a more uniform thickness. or just put the fat end towards the heat & heep an eye on it. i really hate to cut mean as it's cooking cause for me it tends to dry out.
 
Go back to your last thread, Debi splains it for ya!
PDT_Armataz_01_34.gif
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky