Vertical reverse flow build

Discussion in 'Other Builds' started by gotbags-10, Aug 1, 2012.

  1. gotbags-10

    gotbags-10 Smoke Blower

    After using my 30" smoke hollow electric for the last year it's time to upgrade. Figured I'd try my hand at my own build. So this is basically a backwoods clone but done a little differently. Frame is 1" sheet metal interior will be 14 gauge.
    This is two nights of work, frame, charcoal box. The pieces on the side are my heat raceways. They are 3/4 by 6" wide. These will go inside the 1" frame with mineral wool insulation. I did this because I didn't feel like building a third inner wall. I have all my parts and metal cut so hopefully this will move quickly.[​IMG]

    Sent from my iPhone using Tapatalk
  2. daveomak

    daveomak Smoking Guru OTBS Member SMF Premier Member

    GB, evening.....  I'm in..... this is going to be interesting......   [​IMG]  ...  Dave
  3. very interested in building my own BW clone, please keep us updated with info and pics!!

    BTW, did you find plans for your build or come up with your own?

Share This Page