Have any of you ever verified your your Set Temperature with the Internal Thermometer and Meat Thermometer?
I was having issues with everything I was smoking taking much longer than I expected it to. So I decided to compared them to my Maverick ET-733 Dual Thermometer. What I found was not except able to me from MES. I thought they would be much better than that.
First I boiled some water and held my Maverick Probes in the boiling water making sure they didn't touch the bottom for a good reading of the water temperature. They measured 212 and 214 respectably. Now that I know my two Maverick Probes are right on, I can start my test.
I set the MES 30 to 225 and let it stay there till it stabled out. Then I recorded on a chart the Set Temperature, The Internal Reading (the temperature that alternates with the Time on the display), then the Meat Probe, then The Maverick Probes 1 and 2. I then raised the Set Temperature up 5 degrees to 230 and repeated above. I made a chart from 225 through 260 and it came out like this.
Now with this said, have any of you ever taken the Control Panel apart and try to adjust the settings? Mine is no longer under the warranty and I have some electronics background, so I just might bring it in the house and take a peak at it. Just asking if anyone has already done this with or without success and has any input for me. I'm still not Happy that MES doesn't have Temperature Control/Accuracy more accurate then what my test results show.
I was having issues with everything I was smoking taking much longer than I expected it to. So I decided to compared them to my Maverick ET-733 Dual Thermometer. What I found was not except able to me from MES. I thought they would be much better than that.
First I boiled some water and held my Maverick Probes in the boiling water making sure they didn't touch the bottom for a good reading of the water temperature. They measured 212 and 214 respectably. Now that I know my two Maverick Probes are right on, I can start my test.
I set the MES 30 to 225 and let it stay there till it stabled out. Then I recorded on a chart the Set Temperature, The Internal Reading (the temperature that alternates with the Time on the display), then the Meat Probe, then The Maverick Probes 1 and 2. I then raised the Set Temperature up 5 degrees to 230 and repeated above. I made a chart from 225 through 260 and it came out like this.
Set Temperature | Internal Reading | Meat Probe | Maverick Probe 1 | Maverick Probe 2 |
225 | 226 | 254 | 214 | 217 |
230 | 234 | 258 | 219 | 221 |
235 | 238 | 264 | 226 | 228 |
240 | 243 | 267 | 230 | 232 |
245 | 244 | 271 | 235 | 237 |
250 | 251 | 272 | 239 | 241 |
255 | 253 | 280 | 246 | 248 |
260 | 257 | 289 | 252 | 253 |