Help with Cook Shack Smokette

Discussion in 'Electric Smokers' started by tjohnson, Nov 21, 2010.

  1. tjohnson

    tjohnson Smoking Guru Staff Member Moderator Insider OTBS Member SMF Premier Member

    Guys,

    I need help with some dimensions for a Cook Shack Smokette.

    What's the measurement between the side of the smoke box, and the side wall?

    Any Help Is Greatly Appreciated!!!

    Todd
     
  2. thebarbequeen

    thebarbequeen Smoking Fanatic

    In my smokette it's 4.25" from the outer edge of the smoke box to the inner wall of the smoker.

    They have gone back to a different/older style for the smokette "original" now, mine looks like the smokette "elite" 2 rack style.  They 2 are different sizes, so if it's the other one you need, ignore me [​IMG].

    Dimensions: 31.75"H x 20.5"W x 19.5"D. for the style I have,  24.75" X 16.5 X 19 for the current "smokette"

    yep, mesured twice. still 4.25"
     
     
  3. tjohnson

    tjohnson Smoking Guru Staff Member Moderator Insider OTBS Member SMF Premier Member

    THANKS!

    Just trying to verify size, so i can make a custom size AMNS for a young lady in Colorado.

    Todd
     
    Last edited: Nov 21, 2010
  4. thebarbequeen

    thebarbequeen Smoking Fanatic

    I figure mine just isn't roomy enough in there for an AMS, so when I get one (SOON, I keep trying to figure out what I need), I was going to use it in my gas grill. What dust would you recommend for blue cheese?  Does the 6x6 go long enough for cold smoked bacon w/out refilling? I have a photo that shows the inside of my smokette, but can't find it on my hard drive. I'll post it here if I can figure out where it went??  geezlouise I am such a computer dummy.

    [​IMG]
     
    Last edited: Nov 21, 2010
  5. arnie

    arnie Smoking Fanatic

    My smoke box is 4 1/4" wide. When centered its just shy of 5" to each side
     
  6. tjohnson

    tjohnson Smoking Guru Staff Member Moderator Insider OTBS Member SMF Premier Member


    I bet if you pull out the chip drawer, it will fit.  This will work for cold smoking, but if the element turns on, the sawdust could burn up very quickly.  I'm making a 4"x8" for use in the Cookshack, Smokin' Tex, MES 30" and a few others.  I'll make few up and see how they hold up under testing.

    Todd
     
  7. shtrdave

    shtrdave Smoking Fanatic

    The racks on the older one like I have maybe ten years old, are 14x14 and you lose about an inch with the hangers the racks slide into.
     

Share This Page