1947 Kelvanator Build

Discussion in 'Fridge/Freezer Builds' started by ferro1, Apr 6, 2016.

  1. ferro1

    ferro1 Newbie

    [I got this fridge out of Modesto, California. Still working with surface rust that pretty much wipes off with Zep Purple. [​IMG]
     
  2. ferro1

    ferro1 Newbie

     
  3. ferro1

    ferro1 Newbie

     
  4. ferro1

    ferro1 Newbie

    It's going to be pellet fired with the jen-uwine-jerry retrofit plate. I did all this work today. Hung the hopper. I drilled out all the serts and put new ones on the fridge so I could remove it if need be.
     
  5. ferro1

    ferro1 Newbie

    I then drilled the hole for my 5 inch stack.
     
  6. ferro1

    ferro1 Newbie

     
  7. ferro1

    ferro1 Newbie

     
  8. ferro1

    ferro1 Newbie

    I then mounted my vent for my fresh air intake . And drilled 6 1 1/4 holes.
     
  9. ferro1

    ferro1 Newbie

     
  10. ferro1

    ferro1 Newbie

    I still need to drill the the inside for the shelf brackets. Then it tear down and add Roxul.
     
  11. ferro1

    ferro1 Newbie

     

Share This Page