- Apr 20, 2016
- 13
- 10
I had a small gas leak and flames were coming out of the bottom of the grill - this is where the venturi joins the metal grill and I guess over the years the original gasket material has disappeared.
So, the only thing I could find locally was automotive high temp gasket maker (up to 600F) and I used that to seal up the venturi.
On first use, it melted and flames were coming out the bottom again.
ANy ideas what I can do? Is there some sort of gasket material I can buy and cut a hole in?
The BBQ is a fairly old ``Wait Broilmaster``
http://www.canadiantire.ca/en/pdp/permatex-hi-temp-red-rtv-gasket-maker-0383784p.html#.Vxgap7UrLIV
So, the only thing I could find locally was automotive high temp gasket maker (up to 600F) and I used that to seal up the venturi.
On first use, it melted and flames were coming out the bottom again.
ANy ideas what I can do? Is there some sort of gasket material I can buy and cut a hole in?
The BBQ is a fairly old ``Wait Broilmaster``
http://www.canadiantire.ca/en/pdp/permatex-hi-temp-red-rtv-gasket-maker-0383784p.html#.Vxgap7UrLIV
Last edited: