Custom offset

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

mdlownslow

Newbie
Original poster
Apr 8, 2015
7
11
Built this smoker over the summer and to be honest I do not have time to use it. Former life was a compressor tank. Roughly 21x46 cooking chamber ~3/16 thick. Firebox is 1/4”, 18x18. One rack that slides out. Stack is 5”. Asking 750$. Roughly half what it cost to build. Located in laurel, MD.

Will need to bring a trailer the thing weighs close to 500 pounds if I had to guess.

Please email me at [email protected] or private message me here.

Thanks!
 

Attachments

  • 70864138210__58B9A074-AD22-4422-8E6C-AFBC16F25ADB.jpeg
    70864138210__58B9A074-AD22-4422-8E6C-AFBC16F25ADB.jpeg
    235.1 KB · Views: 55
  • IMG_1409.jpeg
    IMG_1409.jpeg
    179.6 KB · Views: 55
  • IMG_1405.jpeg
    IMG_1405.jpeg
    176.7 KB · Views: 50
  • IMG_1410.jpeg
    IMG_1410.jpeg
    218.6 KB · Views: 50
  • IMG_1411.jpeg
    IMG_1411.jpeg
    163.4 KB · Views: 50
  • IMG_1407.jpeg
    IMG_1407.jpeg
    183.6 KB · Views: 56
  • Like
Reactions: Danblacksher
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky