Stainless steel fire box and water pan

Discussion in 'Roll Call' started by boogerb1, Jul 2, 2016.

  1. boogerb1

    boogerb1 Newbie

    Thanks for the add, Im looking for any input from those who have experience with stainless steel and carbon steel smokers. I have a 30" dia. X 5' with a 2'×2' door and its 20 years old. I Am planning on building my next smoker soon but plan on it lasting for the rest of my lifetime. I'm planning on building a smoker out of a 250 gallon propane tank. I'm planning on using stainless steel for a firebox and plan on incorporating a water pan in the entire length of the pit. This firebox and water pan wil be one peice and be made to slide into the pit and be bolted to the pit. This design will also allow me to make this pit a reverse flow smoker. I plan on the fire box being 2'×2'as it has work great on my old smoker. My biggest concern is galvanic corrosion between the stainless steel and the steel propane tank. I hope there are some of you that could help me figure out what would be the best way to go about the building of this new smoker. Thank yall
     
  2. gearjammer

    gearjammer Master of the Pit

    I think you need to go out into the forums into builds 

    and ask your questions there.

    You'll get a much better response there, pretty complex

    stuff.

    I'm just a newbie who stopped by to say hello and [​IMG]  to you.

    Have fun, glad you're here.

         Ed
     
    boogerb1 likes this.
  3. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    [​IMG]

    Glad to have you aboard!

    Al
     
    boogerb1 likes this.
  4. [​IMG]   Good morning and welcome to the forum, from another hot day here in East Texas, and the best site on the web. Lots of great people with tons of information on just about  everything.

    Gary
     

Share This Page