Smoker Pro w/SFB and Reverse Flow Mod

Discussion in 'Classified Ads' started by thadius65, Dec 16, 2009.

  1. thadius65

    thadius65 Smoke Blower

    Anyone interested in my Smoking Pro with mods? I have moved into the ceramic world with my Primo Oval XL and have not touched anything else since. Located in Williamsport PA for pickup only.

    Here are pics of my reverse flow mod w/ stainless, as well as second stack addition:

    Gap on non-SFB side:

    Close-up of Gap non-SFB side:

    Attached to SFB side using SFB nuts/bolts (note about 4" space between stainless and grates. Not sure if to much:

    Looking in from SFB:

    Twin Stack Mod:

    Inside Twin Stack Mod (have exteneded to grates on both sides with metal dryer vent):

    and my (3) new River Country thermo's (1-2" and 2-3"). Reverse flow does a great job of keeping the right and left pretty well in balance:

    In addition to what is seen above, I have an extra bottom half of the main grill and charcoal tray as well as an extra SFB and a cover.


  2. fire it up

    fire it up Smoking Guru OTBS Member

    What are you asking for it?

    I'll send you some seasonings and spices, maybe a pallet full?

    Lots of members up in PA but I figure price or barter would be helpful.
  3. que-ball

    que-ball Smoking Fanatic

    I wish you were a little closer to North Dakota; I'd be very interested then!
  4. thadius65

    thadius65 Smoke Blower

    Here are the details:

    Smokin Pro w/ SFB
    extra SFB
    Side burner (forgot to mention that)
    Char Griller Cover
    spare bottom grill (entire half of unit)
    spare coal tray


    Extra stack added to right side of grill (reverse flow mod). metal dryer vent for both stacks down to grates. stainless steel bottom installed (reverse flow mod). (2) 3" River Country competition thermometers (right and left at grate level Model RC-T3). (1) 2" River Country competition thermometer (center mid top Model RC-T2).
    Mesh charcoal basket for better air flow.

    Unit was seasoned and tested with two cooks. As seen in pictures, balance between left/right is pretty good, but with some adjustments, could be dead on (these are usually really hot at SFB side).

    Reverse flow does what it is supposed to do and I would continue down this path, but with my ceramic Primo, I never touch anything else now.

    I have $400 in it and my time in modding. I will let it go for $350 cash (Paypal) picked up. -- Will accept resonable offers


  5. thadius65

    thadius65 Smoke Blower

    This fell off my radar and never followed through.  If any interest, let me know.  I can be reached at:  tkhaines at hotmail dot com.

Share This Page