Rear-Facing Reverse-Flow Barbecue Trailer

Discussion in 'Reverse Flow' started by spankerchief, Apr 2, 2011.

  1. bearcarver

    bearcarver Smoking Guru OTBS Member

    Excellent job!

    And some tasty looking vittles coming from it already!


  2. :Blushes as he accepts the roses and tiara:

    Thank you.

    Thank you.

    I couldn't have done it without Tom and Bear and all the rest of you urging me on.

    My special thanks to the guys who put together the pit calculators. Beers all 'round for all you guys if you ever stop in Bakersfield.




    Ah, but wait, there's still a little yet to go:

    I added about a half-cup of this to a couple gallons of water and WASHED THE CRUD out of the steel to get the oil out that had seeped through from the seasoning and initial 'Que.


    Then I went to the store and, since VOC paints are banned in California (Tree-hugging b#stards) I bought a bunch of shaker cans of manifold paint.


    (They didn't have enough of one type and I hate making extra trips)

    So anyway:

  3. You guys are SICK !

    I love you man hahahahaha

    What a great build.

    I've never welded and in a few weeks will start my own first smoking build. That being said, you guys explained things so well that even I understood.

    You are masters of your craft.

    Congrats !

    Dave in Canada
  4. bearcarver

    bearcarver Smoking Guru OTBS Member

    Holy chit!

    Now it even looks pretty!

  5. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    Man I thought it looked good without the paint, but now about all I can say is WOW!!!
  6. Reassembled the whole thing, added some boiler tape to the lip of the firebox door and got the lighting harness all put together:


    That's pretty much it  for the build.

    From here on, it's all little detail work to balance the temps and practice, practice, practice.
  7. smokinal

    smokinal Smoking Guru Staff Member Moderator OTBS Member ★ Lifetime Premier ★

    Next up. Fill that baby up with meat & get the smoke rolling w/ Q-view, of course.
  8. bearcarver

    bearcarver Smoking Guru OTBS Member

    Only one thing left for me to say:

    That is freakin' Awesome !!!!!!

  9. rstr hunter

    rstr hunter Smoking Fanatic

    Great build.  That baby would be welcome at my house anytime.  Great job.
  10. Ah, darn. 

    I guess I'm not entirely through with it yet.

    Yesterday I made a little bucket for the grease out of 18 gauge to hang off the side:


    (I take my wiring and license plate mounting very seriously, BTW.)

    ...and perfect neighbor Brian came over and discovered a way to keep it locked on for transport:


    I'm ready to get the thing inspected and registered...Just as soon as the CHP decides to freaking return my call.

    Next up, I need to build the fold-up prep tables on the sides of the smoke chamber and maybe put some drawers in under the smoke chamber for storing tools, dinner ware, spices, etc.

    Meantime, a little light reading:

  11. bearcarver

    bearcarver Smoking Guru OTBS Member

    This whole job is totally Awesome!

  12. tom37

    tom37 Master of the Pit OTBS Member SMF Premier Member

    Fantastic job!!!!!!

    Good luck with the CHP, if its anything like it is here, I'm sure they will give ya a call when there good and ready.
  13. boykjo

    boykjo Sausage maker Staff Member Moderator Group Lead OTBS Member

    Awesome build spankerchief........Your determination has really paid off and you have a beautiful smoker.... I am welder and have built many things before but dont seem to have that drive anymore.

    I am getting to the point where if I want something I would just go buy one but I may have one last build in me if I can find a 250 gal propane tank.

    Again awsome job so get busy and lets see some q off of that smoker

  14. randya

    randya Meat Mopper SMF Premier Member

    Excellent Job!  I must say I have enjoyed reading this thread.  You have done an excellent job showing us all you are truly dedicated at making yourself a one of a kind smoker!  Thanks again and enjoy it. 
  15. That is a very nice build sir!  I'm curious as to what type of insulation you used in the firebox, how much did the insulation cost, and can it be obtained at Lowe's or the like??
  16. I got the insulation from Grainger. 

    It's called mineral wool or stone wool.(

    Grainger sells two pieces of 2" x 2' x 4' for @ $65.(

    You can find it in little cube form at any hydroponics store as well.(They use it as a potting soil)
  17. That is some fine metal work there. As an ex machinist I appreciate good talent and anal retentiveness. That thing is beautiful. Totally handcrafted.

    2 things I really loved about this project though was how you overcame evil in the opening of the grinder wheel packaging. [​IMG] And 2. You turned a piece of wood on the lathe, slit it and milled the handle profile in it and put it all together with the handmade handle. Dude you're insane. I love it.
  18. Thanks Alelover,

    So far,it's been a week of getting the runaround from the DMV and CHP inspection office over the registration.

    I made a half-dozen phone calls and a couple of trips before finally finding out that in California, you only need the CHP inspection for trailers over 2,000 lbs.


    Back to the DMV bright and early tommorrow to spend some quality time with people wearing the same slightly-crazed grin as me.
  19. I hate going to DMV. [​IMG]
  20. michael ark

    michael ark Master of the Pit

    Super nice build[​IMG].Sorry to her about the burocrats .We need to throw them all out and go back to constitutional law.

Share This Page