dumb uds smoker! long story

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Don't give up .... you WILL master it yet ... besides 1/2 the fun of the build is mastering the use of it .... keep playin with it , it will come .
PDT_Armataz_01_34.gif
 
i'm no expert,but i think your smoke stack is to tall,the taller the stack,the more draft it will pull.if it was mine,i would pull the stack off and just run with the bung open and see what it did..how much lit charcoal are you putting in your basket to get it started?
 
More draft it will pull... mmm I didn't know that. I have the stack welded in the lid soI cut the stack to 6 inches long instead of 36"
I use 1/4 chimney full of cowboy lump. I did fill the barrel up with water and found very small water leaks where the bolts hold my basket and a few tiny pin size holes where the 1/2 inch nippels enter the drum. I had some high temp silicone and put a bead of silicone on the outside of the drum where the nippels and bolts enter.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky