Recent content by anderjes

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. anderjes

    Firebox questions?

    So i have done a ton of searching and havent found anyone using something like this. Im building and offset smoker out of a 320 gallon propane tank, with tuning plates. Question now is the house we bought has a older wood stove in the basement. Its all metal. 1/8" on the outside just as a...
  2. anderjes

    Advice needed for reverse flow smoker!

    Sounds good. The only thing would be travling with the trailer and finding some way to keep them in place as you go down the road. Thanks for all the info hope to get started on it this weekend
  3. anderjes

    Advice needed for reverse flow smoker!

    So after the first solid piece is in. Just start out after with a 1/2" gap and increase from there? My guess would be with them you wouldnt weld them in place until a couple fires are ran threw and you firgure out the best spacing on them. What kind of height you normally mount them at ? 4 to...
  4. anderjes

    Advice needed for reverse flow smoker!

    with the trailer i have id like to have a side mounted FB. I looked up the center mounted smokers and with the setup i have that not gonna work. Trailer reasons. If i did just a regular stick burning smoker had the FB to CC opening on the bottom and exhaust oppisite side on top. How much do you...
  5. anderjes

    Advice needed for reverse flow smoker!

    20150323_134445.jpg (2,749k. jpg file)
  6. anderjes

    Advice needed for reverse flow smoker!

    Jambo type is just a straight stick burning correct? Firebox on one end and exhaust on other? No tuning,plate or anything like that? Thats how my last one was. Had a hot end and a cool end. Which i didnt like. Granted it was only 4 feet long so could fill it up very quickly and always had to...
  7. anderjes

    Advice needed for reverse flow smoker!

    If i cut the domes of the ends of my tank the new dimensions would be 30x88. Would that then work for a reverse flow?
  8. anderjes

    Advice needed for reverse flow smoker!

    That pit calculator is confusing. I did the tank chamber size so instead of 30x120 it was 320 gallons. with the rounded end i dont which is correct. for my RF plate could i drop the height of it if i had more of a opening at the end? The round end of the tank wont have my cooking grate over it...
  9. anderjes

    Advice needed for reverse flow smoker!

    IMG_3183.jpg (635k. jpg file)
  10. anderjes

    Advice needed for reverse flow smoker!

    Thanks for the link share. DaveOmak. I did those calculations and its coming up with 2in segment height. Ive still very confused by it. Math never was my strong suite haha. Im confused on how it wont work as a reverse flow smoker. I know the diameter for that long of a smoker isnt ideal but as...
  11. anderjes

    Advice needed for reverse flow smoker!

    @themule69 did go on over to roll call to do a thread on there. With all of my calulations the only one im kinda confused on is my FF to CC opening. It said i needed 23in of opening, so would my 6x16 opening be enough or is that to big? And then with my reverse flow plate that means i need 23in...
  12. anderjes

    New to the site!

    Hey everyone. New to the site her. Read tons of different threads on here. Have gotten tons of info from all of you. My name is Jesse Anderson. From a small town right in the heart of WI. Built my first smoker when i was 14. Love the art of smoking and everything that comes with it. Im currently...
  13. anderjes

    Advice needed for reverse flow smoker!

    Hey Everyone Im new to this site. Ive read many different threads on here and got a ton of info from everyone. Im currently on my 2nd smoker build. Im buulding a trailer mounted reverse flow smoker. I have a 320 gallon propane tank. Dimenisons 30in diameter by 10 feet long. Ive done the pit...
See more
Top Bottom
Back
Clicky