- Nov 5, 2013
- 8
- 10
Hey folks,
I've built myself a DIY temp controller for my 18.5" WSM. The fan, PID, SSR etc. are all housed in a PVC conduit box with an exhaust I cut out for the hose. On the WSM I used 3/4' knockouts on one of the vents capping off 2 holes, as I've seen others use, and plan on running hose to the 3rd vent hole for the air.
I've read on various online sources that the vent holes are 3/4" but I believe that's OD. What are people using for the ID? Without drilling a hole in my WSM I am ultimately looking for a hose barb to male, Male to male with lock nut etc. type fitting.
Note: For those using the caps get Hillman (Lowes, HD). They were a true fit and once on, not an eyesore.
The Hillman Group 3/4 in. Chrome Hole Plug Model #: 881267
Thanks ever so much!
I've built myself a DIY temp controller for my 18.5" WSM. The fan, PID, SSR etc. are all housed in a PVC conduit box with an exhaust I cut out for the hose. On the WSM I used 3/4' knockouts on one of the vents capping off 2 holes, as I've seen others use, and plan on running hose to the 3rd vent hole for the air.
I've read on various online sources that the vent holes are 3/4" but I believe that's OD. What are people using for the ID? Without drilling a hole in my WSM I am ultimately looking for a hose barb to male, Male to male with lock nut etc. type fitting.
Note: For those using the caps get Hillman (Lowes, HD). They were a true fit and once on, not an eyesore.
The Hillman Group 3/4 in. Chrome Hole Plug Model #: 881267
Thanks ever so much!