Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
I have a 4foot by 6 foot wood building with tin on the outside I am going to insulate it with foam what should I use for lining the inside wood or some kind of metal?
Hello cherrywood. I have not built a smokehouse. From reading posts on here, Most folks line theirs with Durock. It's available at Lowe's. You can also seal the seams with high temp food grade silicone for some added piece of mind. Good luck. Keep Smokin!
I have a 4foot by 6 foot wood building with tin on the outside I am going to insulate it with foam what should I use for lining the inside wood or some kind of metal?
I considered this post when thinking up ideas for mine and am going to use unfaced/durock as Dave suggested. One other suggestion, as this is what I am going to do is if you plan on installing an air vent I would recommend using some High Temp Oven Paint on any exposed wood areas.