Want to build a smoke house where to start?

Discussion in 'Smoke Houses' started by dog1234, Jan 24, 2014.

  1. dog1234

    dog1234 Smoke Blower

    Ok been looking over countless post about smoke houses. My question is can a Smoke house be made with the intent of using wood as the heat source?

    I saw plenty that are using propane to heat, but I think i would prefer using real wood.

    What say you?
     
  2. shrekastac

    shrekastac Smoke Blower

    Yea for sure. I am building one now. I'm an amateur but your best bet is to have the wood in an offset smoker. I am almost done with mine if you want to take a look as well as ATCNick built a really nice cedar house. To my knowledge with the high heat of burning wood you want it offset with a baffle or 2 to control heat. Differently go AMNPS cold smoking as well.
     
  3. dog1234

    dog1234 Smoke Blower

    Can you send pictures of your?

    Also with a off set heat source will the smoker get hot enough to cook food?
     
  4. shrekastac

    shrekastac Smoke Blower

    Yea of course. Here is the link to mine. http://www.smokingmeatforums.com/t/154024/starting-the-smokehouse/0_100#post_1122314

    As far as the heat source goes from what I have seen burning wood generates heat upwards 700 - 800 degrees. Sometimes even higher. The trick is insulation. ATCNick did his firebox out of firebricks and regular bricks. I am going to do my SFB as a 1 piece cast kind if like a rocket stove (you can YouTube rocket stove). We both bought cast iron door kits from Vogelzang. He used 6 inch stove pipe and I am going with 8 inch stove pipe.
     

Share This Page