Video notching the rim of the WSM 14.5 and 22.5 for thermometer

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

ben cartwright2

Smoke Blower
Original poster
Jun 7, 2013
82
15
SE Massachusetts
I have seen several threads about how to cut the notch in the WSM's and pictures of it but I decided I would do a video of actually doing it.

I used a Dewalt angle grinder with a 1/4 inch grinding wheel. I didn't use any tape and just eyeballed the depth of the cut, I made it so it just cut the shoulder of the rim.  It is a very easy mod and took about 30 seconds for each cut.

Please check out the video

 
  • Like
Reactions: noboundaries
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky