Using an old fuel barrel for uds?

Discussion in 'UDS Builds' started by john dice, May 31, 2010.

  1. john dice

    john dice Smoke Blower

    Is this safe? Unfortunitly I moved away from my old barrel I was about to convert and I could not fit it in my car. The town I am living in has a Pacific Pride and tons of barrels (which I assume are used for fuel).

    There is also tons of downed wood I could grab to a have a burn for days to clean it out. Will that be good enough?
  2. fftwarren

    fftwarren Smoking Fanatic

    as long as you burn it out real good, it should work fine.
  3. ak1

    ak1 Master of the Pit OTBS Member

    A few good burns, and you'll be fine with it.
  4. rbranstner

    rbranstner Smoking Guru OTBS Member

    If you burn it good it will probably work but if I had the choice I would definately go with a food grade barrel.
  5. rodc

    rodc Smoke Blower

    Engine degreaser then a burnout should clean it fine - certainly the degreaser got mine clean down to nice and shiny metal before the burnout.

Share This Page