Uds thermometer build.

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

cejay

Newbie
Original poster
Jun 11, 2014
2
10
Hi guys. New to the forums here but a long time lurker and just finished building another uds. This one has a bit of a unique thermometer setup I was wanting some opinions on. Basically do you guys like it or not!?


Basically there's a 6mm tube mounted on a small gate hinge which allows it to swing out of the way for putting in and out the basket. The tube holds the probe head with the thermistor righ in the middle of the barrel. Te cable is passed through a sealed hole to the outside of the barrel and voila. Digital thermometer right in the middle but able to be removed.

I know this is a bit ugly just now and refinements are being made. Please feel free to let me know what you think. Considering doin this higher up in addition just ro monitor both levels.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky