UDS build in Antarctica ( I have a drum ? )

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

mike johnson

Master of the Pit
Original poster
OTBS Member
Mar 9, 2012
1,051
59
Lacey, WA.
I just got this barrel, it is brand new from the looks of it. It has a solid top held on with compression ring. The inside is not painted and does not have the food liner. There is some oil on the inside From the making of it I believe. My question is can I just clean the inside out real good with a degreaser and have it good to go. They do not allow open burning of any kind. Here are some pics of the barrel. This is my first UDS build so all comments on this barrel are gratefully accepted.

 
Thats what I would do and then season real good.   The seasoning process will coat the inside anyway.
 
One thing that I learned early on with my first UDS, is it easier to creep up the temp than it is to cool it down. So start closing vents a bit earlier and don't let the UDS get too far above your target temp. My favorite method for lighting is to use my weed burner. I put the loaded basket in the drum and then torch on spot until its going good. Close the er up and usually am at temp and TBS in 10-15 minutes.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky