TS-250 on stand with warming tower

Discussion in 'Reverse Flow' started by top shot bbq, Dec 11, 2013.

  1. Customer Picked up and headed to Muscle Shoals AL. as an upgrade cooker for a new BBQ joint " WHO'S BBQ " weighing in at nearly 1600lbs we had to add last min casters to it to get it on the trailer. ( lift couldn't get high enough for trailer) This cooker will reside in an enclosed shack.

    Specs: Main CC

                top Main CC rack- 58''x22'' 6'' head space

               Bottom Rack  - 58''x28.5''  8.25'' head space

                5'' sq chimney 14''

                double flanged sides / fiber rope bottom gasket

                2'' inner drip rail

               3'' TEL-TRU Therm /2.5'' Probe RVT silicone  sealed threads

                Short counter weight mod due to back wall clearance

    Warming tower-

    14.5'' wide x 23'' deep 5.25'' head space 5 racks. Smoke butterfly vent , 3''sq outflow chimney / fiber rope gasket

    2'' TEL-TRU 4'' prob

    Firebox 24''x24''x24''  -3/16''sides and top 1/4'' bottom- slide air vent inlet / fiber rope gasket

    We also pre-paint underside of all trim and flanges and base material to prevent rust drip lines.

    Jason







     
  2. alaska

    alaska Meat Mopper

    Nice...Very NICE
     
  3. Thanks Alaska, it's a labor of love for sure.. love my job.. well most days anyways..lol

    Jason
     
  4. waterboy12

    waterboy12 Smoke Blower

    That should be able to cook a lot of viddles! I like it.
     
  5. Yea it should !!! The owner has been selling out of Q every Saturday so it was time for an upgrade. We love it when folks can make a living with our products !

    Jason
     
  6. dirtsailor2003

    dirtsailor2003 Smoking Guru OTBS Member

    Wow that's a beast!!
     
  7. driedstick

    driedstick Smoking Guru OTBS Member SMF Premier Member

    Very nice looks great  cant wait to see the product you will be making in that [​IMG]
     
  8. bdskelly

    bdskelly Master of the Pit OTBS Member SMF Premier Member

    5 Stars!
    b
     
  9. It is a real beauty....how does the draw work with that butterfly into the warming rack?
     
    Last edited: Dec 20, 2013
  10. Neither the warming tower or fire box are insulated it has a one inch air gap between the two, the flow is good as a warming tower. The warming tower wasn't designed as true additional CC space. it will hold 150-175 Deg pretty easy. the butterfly will shut down the smoke completely or let it in for BBQ bake beans, or as a cold smoke rack.
     
    steve4christ likes this.

Share This Page