Tips for seasoning

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

djjubbajubba

Fire Starter
Original poster
Sep 25, 2017
37
12
Virginia
A little back story about me: I grew up in Southern California (in virginia now) where we had a fire in the fireplace, maybe, twice a year. Fire wood was purchased at the corner store.

Now, to my topic.

I recently found a guy locally that had downed a pecan tree, and got two 5 foot logs from him. I'm splitting it now. I've never seasoned wood in my life. Does anyone have any tips on not letting it rot through the winter? Also, any tips on splitting, or seasoning are very welcome.
 
Keep it dry. That's the big thing. It will take months to dry it.

I would split into the size you want then wait
 
Yes, keep it dry, and it will dry sooner if it's already split. A general rule of thumb is that it takes a year to season. My experience with maple was that before a year, it would burn OK in the offset but the smoke still tended to be white-ish and harsh. It has improved with time.
 
Can not agree more....keep it dry! Also, stack the firewood on landscaping timbers. Do not stack the firewood against a wood house, wood shed, wood fence, etc. (this would promote terminates) make sure the stacks gets plenty of air flow.
 
Thanks, guys. I've got mine on a large hearth next to my shed. I'm going to move it near my garden so it gets more sunshine. I just don't want my wood to go to waste like the wood that was already stacked on it when we moved in (I'm pretty sure it's been there a while, though).
 
Update: I've found that putting wood in about to use in my propane grill (on the top shelve) for an hour or two at 500 degrees makes it dry as hell.
 
Firewood hoarders such as myself use a moisture meter to determine if it is dry. That said, I don't know what is acceptable for smokewood.
 
Pecan, I use when it's very well dry. However I know some pit masters who swear by green (still freshly cut) hickory in their pits, but those are stick burners. If you are going to use the pecan in chunks in a charcoal smoker, go ahead and cut them into the final chunk size. More surface area and the smaller size of the chunk will speed the drying process.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky