stainless food warmer conversion to smoker???

Discussion in 'Fridge/Freezer Builds' started by labrador103, Oct 20, 2011.

  1. labrador103

    labrador103 Newbie

    I have a used food warmer which is about 5' 6" tall 22" wide 26" deep.  I need to come up with a way to heat the unit for smoke and drying.  I also need some racks.  Probably need a dampener and an exhaust.  Any tips would be greatful

    Thanks
     
    Last edited: Oct 24, 2011
  2. danmcg

    danmcg Master of the Pit OTBS Member SMF Premier Member

    What brand of warming cabinet do you have? I know some of them can be converted to a heating unit just by changing  the heat element. does yours have humidity control?
     
    Last edited: Oct 21, 2011
  3. labrador103

    labrador103 Newbie

    I will have to check I will look tomorrow
     
  4. labrador103

    labrador103 Newbie

    The model of warming unit I have is, Cres Cor.  there is a fan and a heating unit.  The unit is insulate, it should be fine since it was a warmer, the temp gauge says it will register to 220 degree's.  there are two doors an upper and lower, which both doors open to one main compartment. 

    I need a little help on what to do with this warmer.  I do not want to screw it up.  Any help would be appreciated.

    Thanks
     
  5. labrador103

    labrador103 Newbie

    how would a smoke daddy, or an A-Maze-N-Pellet smoker work on a unit like this.
     
  6. fishwrestler

    fishwrestler Smoking Fanatic Staff Member Moderator OTBS Member

    Add some pictures that might help people make suggestions

    Robert
     

Share This Page