Smoke stack size

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

smokerjoe

Newbie
Original poster
Jan 7, 2013
25
10
Meridian, MS
Hey guys-
I have a reverse flow smoker that I had made. I had it made before I ever heard of feldon's calculator.
I ran my dimensions through calculator--my present smoke stack is 2" square tubing that is 7" long , which is grossly undersized according to feldon.


Here is my question: is it ok to install dual smoke stacks to reduce the
 
Look at the notes on the chimney section on Feldon's, it recommends it should be around 30 inches to assure good draw. You may have to increase the diameter, so it may be easier to just cut that one out and put in the correct sized piece of pipe to reduce the surface area.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky