smoke addon

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

skizz

Newbie
Original poster
Jan 7, 2014
14
10
Hey guys I got a masterbuilt smoker for Christmas and have used it a few times and it seems I have to add wood chips quite often so what I'm looking for is opinions on the cold smoke add on that is built for the masterbuilt smoker or should I go with the a-maze-n-pellet? Pros and cons and experiences with both would be great
 
i have the ad on cold smoke unit and it will burn chips, sawdust, pellets. i have actually extended it from my MES with a piece of 3" heat duct. can run the smoker at 100 degrees or 275 and have smoke. its a matter of preference. where i loive ican afford the freight on the fuel for the AMZN but everything works. no right or wrong answer. all i am saying is that i like the masterbuilt cold smoke unit. cant get the hours of continuous smoke out of it that the AMZN will give you tho....
 
Hey junk collector or anybody else for that matter where do you put the AMNPS in a masterbuilt so it doesn't take up a bunch of room?
 
If you have the MES 30 then it goes on the wire rails just to the left of the original chip pan.  If you have the MES 40 then it will fit on the floor to the left hand side, you will not loose rack space with either method.

Gary
 
thanks alot garyinmd now to try and find a store that sells them
 
 
thanks alot garyinmd now to try and find a store that sells them
This is the best place to purchase...http://www.amazenproducts.com/Default.asp  The source and the only place with no hassle customer service...JJ

Just a note...If the MES you have has the Blue lit controls up front...One of the Tube smoke generators or the Mail Box Mod will be your best choice.
 
Last edited:
skizz, as chef jimmy j says, go to the source. todd has always been a pure pleasure to do business with. as i said, i have the amnps (dust/pellet style) and a mes30 so mine won't fit down by the heating element. i sit it on top of the water pan or on the bottom shelf of my smoker, i also pull my chip tray completely out. 
 
thanks guys i will have to look into an amnps cause i think theres a place here that sells 20 pound bags of pellets for about 20 bucks. Only downfall is is that the shipping for the amnps is almost as much as the unit itself 
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky