Sealing cooking chamber

Discussion in 'Side Fire Box' started by harleyguy84, May 16, 2013.

  1. redneck69

    redneck69 Smoking Fanatic

    that should work...just make sure you clean any and all grease off the mounting surface and use a really good quality high temp food safe adhesive
     
  2. sqwib

    sqwib Smoking Guru OTBS Member

    I use the red RTV Silicone, I Pam the chamber where the door will meet, put the RTV on the underside CLEANED portion of the lid, close and let dry. made a perfect seal and has been holding since.
     
  3. dancg68

    dancg68 Fire Starter

    Is the Pam to keep the silicone from sticking to the box or to clean it?
     
  4. oldschoolbbq

    oldschoolbbq Smoking Guru OTBS Member

    No , to keep it from sticking to the other side of the door...SaranWrap works too .[​IMG]
     
  5. dancg68

    dancg68 Fire Starter

    Ok.  Just wanted to make sure I understood the process before I wasted my time/money.
     

Share This Page