Rust problems with the Lang?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

charcoal lump

Newbie
Original poster
May 14, 2015
3
10
I've been reading up on the Lang and noticed a couple of people mentioning rust problems with their Lang. It seems like the rust issue is on the firebox. Has anyone else had this issue?
 
It's a pretty common with most offset stick burners, due to the high heat from the fire, it will begin to rust without the proper upkeep.  I will typically wire brush and repaint mine at least once a year, sometimes more depending on how many competitions I do.  I like to look good, while I cook good!  Some folks will oil their firebox every so often, some will spray it down with WD-40.  The pits with insulated fireboxes won't run into this problem because the outer layer is just a skin and has been protected from the high heat with insulation. 
 
Last edited:
Thanks. I appreciate your responses! I'm really deciding between a Lang 36 hybrid and a Yoder Loaded Wichita because I want an offset stick smoker with grilling capabilities. I like what I read about the reverse flow design of the Lang but it does have a smaller smoking surface than the Yoder. Price and shipping isn't really a big deal breaker for me. What is your opinion?
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky