Pot question

Discussion in 'Mini WSM Users' started by lemans, Sep 28, 2014.

  1. lemans

    lemans Master of the Pit OTBS Member SMF Premier Member

    So group.. Does it make a difference if the 32 qt is aluminum or stainless steel?
     
  2. mdboatbum

    mdboatbum Master of the Pit OTBS Member

    As long as the dimensions are correct, no it doesn't mater.
     
  3. jckdanls 07

    jckdanls 07 Master of the Pit Group Lead OTBS Member

    :yeahthat:
     
  4. brooksy

    brooksy Master of the Pit

    Whew!!! Thought I was on the wrong forum for a minute from the headline :biggrin:
     
  5. brooksy

    brooksy Master of the Pit

    I have the aluminum pot and seems to work just fine.
     
  6. mdboatbum

    mdboatbum Master of the Pit OTBS Member

    I think most of the jumbo builds use a stainless pot. Other than the cost, I think the performance would be similar.
     
  7. dirtsailor2003

    dirtsailor2003 Smoking Guru OTBS Member

    As stated either is fine. Stainless is harder to drill and cut so you have to have the proper tools to do the job.
     
  8. welshrarebit

    welshrarebit Master of the Pit

    It took me a second but...

    :ROTF

    It's easier to get "pot" here that a 32 qt. pot! :biggrin:
     
    brooksy likes this.

Share This Page