PID help

Discussion in 'Electric Smokers' started by gotbags-10, Oct 25, 2011.

  1. gotbags-10

    gotbags-10 Smoke Blower

  2. justpassingthru

    justpassingthru Smoking Fanatic OTBS Member

    Hey Bags,

    My first question is how much do you know about PID's? 

    You might want to do a "PID" search here, there is lots of info, ...the reason I asked the question is there was another member here that bought a Chinese PID and the instructions were useless to him because they were written in Chinese, sooo..., if you know your way around PID then it might be a good deal, you will also need a heat sink, junction block, a box to mount it in, ...what's the warranty policy?

    I bough mine and everything I needed from Aubers Instruments, the have an excellent customer service and can answer any questions you might have, ...if this is your first venture into the world of PID.

    Here's the link, they have PID controllers  just for smokers,  ...but they cost more.

    Here is a good link, I used it for my installation:

    I hope that helps, keep us posted with what you decide,

  3. gotbags-10

    gotbags-10 Smoke Blower

    thanks for the link! I ordered the kit from ebay so fingers crossed. I will go ahead and add the heat sink as well. Will post when i get it done. For 50 bucks cant beat it if it works [​IMG]
  4. flyweed

    flyweed Smoking Fanatic

    yep..I've done alot of work on PIDS as well...and if you know what you are doing..they are great...I would also suggest to order the PID setup from Auberins...they have nice equipment, and the directions come in ENGRISH as well. :)

  5. jalan43

    jalan43 Smoking Fanatic Group Lead

    I have one of the PIDs from Auberins. The thing is awesome! Plug and use! I use a Cabela's  1500 watt element. It does not get easier than this!

Share This Page