PID controllers for electric fidge smokehouse

Discussion in 'Fridge/Freezer Builds' started by bbqonice, Apr 15, 2012.

  1. hi all..want to put it right out their quickly rather than searching around on here.

    I want to use a standard two burner table top hot plate for my smokehouse....it will be about 1500 watts total on 110 power cord.

    Can I use this PID to plug the hot plate in to tell it to turn on and off by interior temp?

    http://www.auberins.com/index.php?main_page=product_info&cPath=14_28&products_id=72

    The only reason I was going to go two burner unit...one for heat..the other for my smoke wood chips.

    thanks for your info...
     
  2. nepas

    nepas Smoking Guru Staff Member Moderator Group Lead OTBS Member

    Yes you can. I use one for my Bradley. Plug the hotplate to the back of the PID and the pid to the socket. hang the pid temp probe where you like in the box.
     
  3. Last edited: Apr 15, 2012
  4. mneeley490

    mneeley490 Master of the Pit OTBS Member

Share This Page