Painting a logo on my uds build.

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Hello.  This one is easy.  Since you asked the question I will assume you are not a painter.  If you want a custom paint job you need to go to the folks who know how to do it.  Find a nearby paint and body shop.  Get a quote.  Maqny of those guys do work on the side and may be able to give you a good price.  Keep Smokin!

Danny
 
This is what I would do. Buy a sticker of the JD emblem. Paint the area where you want it yellow with high temp primer, then high temp paint. Follow all the directions and cure properly. Once cured apply the stricker to the painted area. If needed use an exact P knife to cut out the sticker prior to putting it on the drum. Once adhered paint the high temp green over. Before the green is fully cured, carefully remove the sticker. You may need to use an exact-o knife to to do this.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky