Newbie Reaching Out on a MB 30 + Cold Smoker Unit or maybe a Iron Cheff Unit?

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
 
 In it's present configuration the AMNPS would have to be placed on the lowest rack on a GEN 2. I'm attaching a pic of my GEN 2 so anyone see a place where I could put the AMNPS other then the lower rack. 
The AMNPS would not have to be placed on the lowest rack in a Gen #2 MES,

The best place for the AMNPS in a Gen #2 (like you have) is to remove the little water pan from it's position.

Then you would set the AMNPS over the hole left where the Water pan was.

Then you put your water pan away, to keep from ever having to either wash it or cover it with foil.

Then you put a throw-away foil pan on the floor under the water pan hole to catch any drips.

Just a little info,

Bear
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky