New Member from NJ

Discussion in 'Roll Call' started by jubilee847, May 31, 2013.

  1. jubilee847

    jubilee847 Newbie

    Hello all, my name is Mike and I live in Southern NJ. I am a new member but not new to this site, I have one word for this site

    "Awesome". I am on this site a lot researching. This is a great place to be if you smoking and the members are a good bunch,Thanks.

    I have grilled for many years and a little bit of smoking on one of those small offset smokers. I'm not bad but I am ready to build an reverse smoker. I have read and heard so much about these smokers. Everything I see I think "oh that would make a nice smoker".

    I got it bad and watching BBQ Pittmasters 24/7 only adds fuel to the fire. It is time to build so I will need help. My goal is to eventually build a 250 or 300 gal propane tank smoker when I can find one.

    This week I found a 120 gal propane tank for $10.00 so this will be my first build. I will take some pics and post them. I know I will need help on my next step which is is to get this tank cleaned out on the inside, prepped and ready to cut.
     
    janineg1968 likes this.
  2. kathrynn

    kathrynn Smoking Guru OTBS Member

    [​IMG]to SMF!  We are so glad you joined us! Would you mind updating your profile to show the other SMF members where you are located?  You might find a few neighbors!

    The folks in the Builds section will be a big help too!  Show pictures and ask questions!

    Jeff offers a free 5 day E-Course.  It's packed with great information to use...no matter what your experience level might be!  http://www.smoking-meat.com/smoking-basics-ecourse

    If you didn't read the "Terms of Service" notes.....please do.  There are a few things that everyone should know about those pesky little rules before plunging into the forums. http://www.smokingmeatforums.com/a/terms-of-service

    If you need any help roaming around the forums....just holler!  Happy to help out!

    Kat
     
  3. oldschoolbbq

    oldschoolbbq Smoking Guru OTBS Member

    Welcome , Mike. We hope you decide to call this your Cyber Home. Yes, the folks treat  you as a person and Family member, jump in any time and voice your opinions or questions. We listen and reply in a timely manner.

    Hope you have fun and as always . . .
     
  4. seenred

    seenred Smoking Guru Group Lead OTBS Member

    Welcome to the Forums, Mike! Glad you've joined us. This is a great place to learn and share ideas on our favorite pastimes...smoking, grilling, and curing great food! Good luck with that build project, and just ask any time you need help, and you'll get plenty!

    Red
     
  5. jubilee847

    jubilee847 Newbie

    Hey Thanks I am happy to be a member and look forward to my first build.
     
     
  6. jubilee847

    jubilee847 Newbie

    Thanks a lot Red. Where can I go on this site to learn how to post with pics for a new build. I just tried to post for a 120 gal RF smoker build, loaded some pics of my tank and asked for some advice on cleaning and prepping. My comp. went crazy, I had to shut it down and start again. I guess it had something to do with my pics.

    Thanks mike
     
     
  7. s2k9k

    s2k9k AMNPS Test Group

    Hi Mike! :welcome1: to SMF!!! We're happy you found us! You've come to the right place, we have over 50,000 members who just love to share their experience and over 900,000 posts describing it!

    The search bar at the top can be your best friend when you are trying to find answers to your questions but you can still ask too if you want!

    Would you do us a favor and add your location to your profile, it helps others to know where you are when they offer advice, Thanks!

    You might want to check out Jeff's Free 5 day E-Course, it will teach you all the basics plus a whole lot more!

    This might help with uploading pictures:
    http://www.smokingmeatforums.com/a/how-to-upload-a-photo-q-view-to-your-post
     
  8. jubilee847

    jubilee847 Newbie

    This is a test.  Hey friends just wanted to make sure I could load the pics.

    OK so this will be my new 120 gal RF smoker build. I need some help on cleaning and prepping and what valves to remove.

    thanks mike


     
    Last edited: May 31, 2013
  9. jubilee847

    jubilee847 Newbie

    Hey Dave Thanks, just did a test with pics so far so good.

    Thanks mike
     
  10. njfoses

    njfoses Meat Mopper

    Welcome Mike.  What part of Jersey?  Im in Southern Ocean County myself.
     
  11. jubilee847

    jubilee847 Newbie

    Thanks, I am in Salem County. Do you have a smoker?

    mike
     
     
  12. njfoses

    njfoses Meat Mopper

    Yep, I use the mes 30. Be warned it becomes very addictive !
     

Share This Page