New Braunfels Black Diamond smoker refurbish

Discussion in 'Charcoal Smokers' started by tk427, Oct 21, 2014.

  1. tk427

    tk427 Newbie

    I received my New Braunfels Black Diamond (NBBD) smoker for the incredibly low price of free from my boss (thanks Doug!). I have made internal modifications like a pre made tuning plate from Horizon, extended the chimney to the cooking grate, added dual thermometers at the cooking grate level and I made a charcoal basket for the firebox.  I also sealed up the CC and fire box lids and the side opening to the firebox with nomex.

    I had a lot of rust on the outside of the firebox and the wood handles and tray on the front were shot so I decided I needed to pretty it up a little bit.  

    Here are the results.  Now my old girl looks as good as she smokes!  Only thing left to do is reproduce the old New Braunfels Smoker Company logo so I can stick it on the lid. I hope to make plenty of extras so if someone has an old NBBD smoker that they want to make look like new again they can have everything look original. 




     
  2. smokininidaho

    smokininidaho Smoke Blower

  3. tk427

    tk427 Newbie

    I just looked at your post, smokininidaho and that is definately one of the older ones. You can tell because the legs bolt directly onto the cooking chamber and the lid hinges should have NB engraved on them. Your smoker looks great! With the right mods you will be able to get even heat across the CC. If you add a firebox basket, you will be able to get 4+ hours of burn with little babysitting.

    That is a great smoker, you will have excellent results.
     
  4. smokininidaho

    smokininidaho Smoke Blower

    Thanks, yes I need to build a charcoal basket for sure. Glad to know this is one of the older ones, had a feeling it was. It does have the NB stamped on the lid hinges.
     
  5. socalsteve

    socalsteve Newbie

     
  6. tk427

    tk427 Newbie

    Hi Steve.  I didn't disassemble as mine wasn't too terribly rusty.  I just gave it a good sanding and then sprayed it with high heat black. As for the handles, I ordered replacements from the Brinkmann website, but I don't think that it is up anymore.  Char-broil has parts as well, just order them for a 16" smoker. I'm sure if you google them you can find them.

    I still haven't had a chance to reproduce the stickers. I hope to be able to do so soon.

    A little tlc and it will be a nice smoker.  I believe that you should sit by the smoker and drink beer and watch the temperature all day, but with the mods I've made, you can leave for a few hours and you will be ok.

    Good Luck in your restoration!
     

Share This Page