Need some opinions on cc

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

lilbuilder

Newbie
Original poster
Mar 13, 2016
23
14
Bout to start cutting up this tank but got to thinking about all of the holes in

All together there are 7 couplings welded into it all around the tank, would y'all just keep the holes and plug them or cut them out and patch it back together?
 
I would orient the tank so that I could use one of the ports for a grease drain, and just leave the other ones plugged as they are.

Whether you cut them out and patch the holes is a cosmetic decision based on you personal preference.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Hot Threads

Clicky