Need Quick Look Please

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Looks good. remove.

recommend electric with auberins dual control pnp. building my second one with that set up and works really, really well.
 
It will work fine.. just have to start stripping it and getting rid of all the plastic.. some people say not to worry about it.. but with mine i replaced all the insulation with new stuff.. and there was black old silicone that i removed... is it food safe? nobody really knows so why risk it.. i was able to find some contractor solvent that did help break down the silicone and make it a little easier to remove.. but its a job! the fridges are a big job if you want to do them right, but very rewarding when they are done and damn good smokers as well! 
 
i wnt to a local metal shop and for $200 they will cut and bend all the metal I need to replace the plastic in my fridge conversions and make 5 expanded metal shelves. Took in a strip of the plastic trim from inside the door so they could match the shape as close as possible. Helps with the door latch if its close to the same curve or angle.

I removed all my old insulation as well, had it apart anyways. Didn't bother removing the goop inside the fridge except anything on the porcelain coated insert itself, inside or out.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky