Need help!!

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

tango87

Newbie
Original poster
Mar 17, 2012
17
10
Sanford nc
I want to build a smoker, firebox is built and i want to do a bottom mounted firebox. is that design a good and efficient way? im building a 11 gauge smoke box to go above it at 22x22x36 and wanted to know if it will work ok before i buy the steel and make the first weld
 
I was planing on a 24 deep 24 tall and 36 long. The top will be 12 inches and 45 degree down to the side for a door. I want to mount the firebox underneath but haven't decided if I want a flush mount or drop it down and run a stove pipe wrapped with insulation the fire box is 18 inch cube
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky