Need help identifying a stuffer

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

miah2016

Newbie
Original poster
Oct 3, 2016
4
10
I recently purchased a hydraulic stuffer and was hoping someone here may recognize it an be able to tell me the make, model and where I could get gaskets for it. The individual I bought it from couldn't answer any of these questions. The only information I could find on the unit is a 220 volt on the front and a number stamped on the top of the base FU-20-84. Any information would be greatly appreciated. I will try and add some pictures hope it works. Thanks for looking.
Jeremiah
 
Welcome Jeremiah
welcome1.gif
,,, congrats on the new toy but ya pictures would be great. 

A full smoker is a happy smoker

DS
 
 
Thanks looks like I got it to work hope someone may be able to help.
123090ca22d3721dbfb93d34d0554b22.jpg
cfdb3ff61cef72bcda0ab955b3088bdc.jpg




Sent from my iPhone using Tapatalk
 
Last edited:
I can't help you with the make, but thats a beauty!!!
Maybe you can find some info on the motor or pump.
 
Last edited:
M2016, Try to measure your o-ring area for thickness and outside diameter and maybe a generic o-ring will work? Also a  company called " Professional Processing " sells hydraulic stuffer parts.Good luck on fixing the stuffer up !
 
Thanks I'm going to try and take it apart to see if there's any info on the pump. The motor just has the standard info on it.
 
Phrett
Thanks for check but by the looks of that company they've only been in business since 2005 and there motors are 50 hertz. I believe this stuffer is much old and it runs on 60 hertz.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky